Cross flow cooling towers are typically expensive to build and have higher initial cost with respect to counter flow cooling towers:

Type 304 stainless steel construction is not recommended for cooling towers that are to be used in highly corrosive duty:

Which of the following parameters determine the inlet and outlet water temperatures:

In Evaporative cooling tower system the make-up water source is used to replenish around ____ of water lost to evaporation and draft

Cooling tower size is _______ to the heat load

The sensible heat transfer occurs if the dry bulb temperature of _____ is less than the dry bulb temperature of the _____:

Design wet bulb temperature for cooling tower is the Wet bulb temperature that does not exceed more than ______ of the total hours in a year:

In Counter current cooling towers, the air moves ______ through the fill, counter to the downward fall of water:

In cross flow cooling towers, the air moves _____ through the fill across the downward fall of the water:

The size of cooling tower dictates the rate of heat transfer:

Which of the following cooling towers are induced draft:

The Cooling Water Temperature leaving a tower increases as the Wet Bulb Temperature _____ :

The total heat transferred between warm water coming in contact with cooler air in cooling tower is equal to which of the following:

At constant heat load, range and approach the tower size varies ______ with the actual wet-bulb temperature:

For a constant flow, when the heat load decreases the range ______ :